Oki 70037601 Manuale Utente

OKI 70037401,70037501 & 70037601Memory DIMMInstallation Instructions

10Check for Proper InstallationGenerate a MenuMap printout and check to be sure that the DIMMs areproperly installed:1 Press MENU once or twice until

11Change the Memory Settingin the Driver(s)Windows® Adobe® PostScript® Driver1 Click Start Settings Printers.The Printers dialog box opens.2 Right

12Macintosh® Driver1 Activate Chooser from the Apple menu.2 Select LaserWriter 8.3 Click Printer Setup.4 Click Configure.5 Change the Memory Configur

13Limited Warranty:United States & CanadaOki Data Americas, Inc. (Oki Data) warrants this OPTION to be free from defectin material and workmanship

14IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVEWARRANTY PERIOD DESCRIBED ABOVE OF ONE (

15Oki Data Service Depot InformationUNITED STATES CANADAOki Data Americas, Inc. Oki Data Americas, Inc.2020 Bishops Gate Blvd. 2735 Matheson Blvd. Eas

Oki Data Americas, Inc.2000 Bishops Gate Blvd.Mt. Laurel, NJ 08054-4620Tel: (800) 654-3282FAX: (856) 222-5320http://www.okidata.com58346602

Every effort has been made to ensure that the information in this document iscomplete, accurate, and up-to-date. Oki Data assumes no responsibility fo

3Getting StartedThe printers have four sockets for memory DIMM boards. You can expand theprinter's memory up to 1 GB by installing four 256-MB DI

4Prepare the Printer1 Turn the printer off and unplug the power cord.2 Detach the interface cable from the printer.3 Remove and save the thumbscrew at

54 Grasp the control board, loosen it by wiggling it back and forth, and slide itout of the printer.C7000 Series C9000 Series

61 Locate the DIMM sockets (1) on the control board.!DIMMs must be installed in the socket number sequence 1-3-2-4.Socket numbers (1) are located at

72 Push out the white lock tabs at either end of the DIMM socket.Caution!Circuit boards can be damaged by static electricity and rough handling. Toavo

8Complete the Installation1 Align the bottom of the control board with the track in the printer and slide itback into place.C7000 Series C9000 Series

92 Reinstall the thumbscrews at the top and bottom of the board.C7000 Series C9000 Series3 Reattach the computer interface cable.4 Plug the power cord