Oki 12i Manuale Utente Scaricare il pdf (Pagina 57)

OKIPAGE

12i

User’s Guide 47

➦

4 Problem Solving

Hardware Problems

Symptom: Graphic image prints partly on one page, partly on the

next.

Problem: Insufficient printer memory for this image at this

resolution.

Solution: Change the resolution, reduce the image size, or install

more memory in your printer.

Symptom: Nothing happens, but printer indicates it is ready to

receive data.

Problem: Configuration error.

Solution: Check cable connection; if serial, make sure appropriate

MODE command has been used (PC). If more than one

printer is available, make sure your printer has been

selected. Make sure your printer is on-line.

Symptom: “Garbage” prints.

Problem: Incorrect cable configuration. (Also, see “Software

Problems.”)

Solution: Check cable configuration, continuity, and length.

Symptom: Printer freezes or displays error message when computer

is rebooted.

Problem: Booting the computer while the printer is on can cause a

communications error.

Solution: Take printer off-line before rebooting computer.

Problem: Gases are given off by forms or adhesives passing

through the hot fusing unit.

Solution: Make sure the forms you use can withstand heating, and

provide adequate ventilation.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 65 66

Nessun commento

Oki 12i Manuale Utente Pagina 57