Oki ES3640E Manuale Utente Pagina 1

11ES3640e MFPTechnician’s Installation GuideConfiguration Awith High Capacity FeederWith optional Finisher:Configuration Bwith Second Tray and Cabinet

10Step 3 Assemble the Stand.Accessories in the Stand Box ES3640e MFP 99.jpgES3640e MFP 13a.jpg8 Leg Bolts with Lock Washers and Flat Washers for Sta

111. Unpack the stand, removing any shipping tape/materials.Stand Components:• Scanner Support Shelf (1)• Stand Frame with Posts (2)• Two Legs with Ca

122. Attach the legs with casters to either end of the frame, using the eight leg bolts.3. Turn the stand over on its legs. Place the foam bumpers in

136.7. Hold the plate lock mechanism with the flat plates facing the inner side wall of the shelf (cables facing the outer side wall) and begin to fee

149. First person: pivot the release handle (1) on the side of the stand down and hold it there. Second person: hold the safety lever (2) back and man

15Step 4 Mount the Scanner on the Stand and Secure it to the Shelf.1. Unpack the scanner and Auto Document Feeder (ADF) lid.2. Install the ADF on the

164. Secure the scanner to the shelf using four medium screws:a.First screw: Pull the safety lever (a) back to expose the hole in the shelf. Insert on

178. Insert the locking cap in the scanner lock.9. Lift the ADF paper tray, then extend the legs and lower the tray into position.Step 5 Make Scanner

18scanner power supply. then connect the other end to the power strip.6. Uncoil the DCD cable and mount the ferrite cores (1) on either end of the USB

19Step 6 Attach the Printer to the Stand1. Mount the brackets on the back of the printer:a. Remove the two screws shown in the illustration from the b

22Do not begin installationof this device before readingthis entire Installation Guide.Important safety warnings follow.ES3640e MFP Warning Icon.jpg

203. Move the printer back toward the stand.4. Connect the printer power cord to the power strip.5. Use the thumbscrews to attach the printer to the b

21Step 7 Finish the Installation1. Press on the release handle to lower the scanner shelf.2. Insert the main power cord into the power strip, then con

223. Connect the ferrite core end of the Ethernet cable to the printer, then connect the opposite end to the network.Install the SoftwareSee the Softw

© 2005 Oki Data Americas, Inc. 59375602OKI, ® / MD / MR, Oki Electric Industry Company, Ltd.Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laur

3OverviewConfiguration AES3640e MFP Configuration A is shipped in four units:1Printer2High-capacity Feeder3Scanner4StandSee page 11 for more informati

4Basic RequirementsSpaceElectrical:Voltage: 110-127 VAC, 60 HzPower consumption, Operating:• 1,500 W maximum• 750 W typicalEnvironmental:Temperature:

5Step 1 Install the Printer on its Support.Configuration A: High Capacity Feeder1. Unpack the High Capacity Feeder (HCF) and remove any external shipp

6Configuration B: Cabinet/Second Tray1. Unpack the printer cabinet and remove any packing materials. Note the location of the pins (1).2. Unpack the s

7Step 2 Prepare the Printer.1. Load paper in the trays.a. Pull out the tray.b. Squeeze the release on the paper guides and move them apart.c. Remove t

84. Lift the operator panel, open the front cover and remove the shipping tape. Close the front cover.5. Remove the colored image drum packing pieces.

98. For each color toner cartridge:a. Shake the toner cartridge from side to side to distribute toner.b. Remove sealing tape and insert the cartridge